We convey ideas.

MADE TO ORDER DESIGNS

• Nercon offers multiple designs of discharge conveyors on accumulations systems.
• A typical configuration uses single filing to bring the product flow to a single line of products.
• Adding a sweep bar to an Accumulation Table will ensure the complete unloading of the table, with no product remaining on the deadplate.

Contact our technical experts for application -specific information.

How the Bi-Directional Accumulation Table Works
When a conveyor line stoppage occurs, a limit switch activates the motor on the table. The table's belt moves at a right angle away from the conveyor line to load the table. Temporary storage for containers, excess bottles or cans is provided while production continues upstream. A limit switch stops the operation when the table is full.

When the blockage is cleared, the table automatically reverses the belt movement, unloading the table into the conveyor line. Stored products are fed back onto the primary conveyor line at the proper speed, minimizing pressure by blending stored products with the normal flow of the production line.